SNOWGROOMER CATALOG

Snow Groomers & Snow Grooming Equipment for winter sports.

Narrow Trail (20-44 in)

PATH-MASTER®

PATH-MASTER®

Category: Narrow Trail (20″ – 44″ Trail Width)

Application: Create compacted corduroy trail great for dog sledding, fat bike trails, tubing runs, snow shoeing / hiking trails, and so much more.

Recommended Towing Machine:

  • UTV (with Snow Tracks)
  • Snowmobile

Available Accessories:

  6in STD PIN Coupler (3″ & 5″ Offsets available)

6in RING Coupler (3″ & 5″ Offsets available)

12″ Standard Wing Set

36″ SNO-RAZOR & Deflector

LOPPET 60 Drawbar

Standard 44 Drawbar

CUSTOM 20″ – STEEL SNOW GROOMER

$1,500.00$4,600.00

CUSTOM 20″ – STEEL SNOW GROOMER

Build YOUR perfect 20″ groomer with the options below!

*The SNO-BLASTER is only available with the LOPPET 60 Drawbars.

DeTRAKOR

$600.00

TrailBlazer 20

$700.00

TrailBlazer 20

SnowGroomers.net’s newest addition Ultra Light Weight Snow Groomer to our narrow trail grooming drags is extremely light weight and can be towed by nearly any snowmobile.  Made from durable 1/2″ HDPE and 1/4″ ABS and has been tested to hold up to 200 lbs. of concrete pavers or blocks. Designed for quick and easy setup to set a compacted corduroy snow trail system.  Lots of folks want to build their own snow groomers. Often they want to save money.  This takes time and trial and error.  The TrailBlazer is meant so you can afford it and take a lot less time than building your own.  It is built to not rust or rot so it will last many years.

Recommended additional purchase – 4 to 6 (16″ x 16″ x 1″) concrete pavers or add 30-40 lbs of weight to the chassis for proper compaction and corduroy.

Note: Not recommended for

– professional or extensive snow trail grooming

– snow trail grooming over rough terrain with hidden hazards, such as large rocks, tree roots, or tree stumps.

TrailBlazer XC 20

$700.00

TrailBlazer XC 20

Snow Groomers newest addition to our narrow trail grooming drags is extremely light weight and can be towed by nearly any snowmobile.  Made from durable 1/2″ HDPE and 1/4″ ABS and has been tested to hold up to 200 lbs. of concrete pavers or blocks. Designed for quick and easy setup to set classic cross-country / nordic ski tracks.

Recommended additional purchase – 4 to 6 (16″ x 16″ x 1″) concrete pavers or add 30-40 lbs of weight to the chassis for proper compaction and track setting.

Note: Not recommended for

– professional or extensive snow trail grooming

– snow trail grooming over rough terrain with hidden hazards, such as large rocks, tree roots, or tree stumps.

TrailBlazer XC 36

$900.00

TrailBlazer XC 36

Snow Groomers newest addition to our narrow trail grooming drags is extremely light weight and can be towed by nearly any snowmobile.  Made from durable 1/2″ HDPE and 1/4″ ABS and has been tested to hold up to 200 lbs. of concrete pavers or blocks. Designed for quick and easy setup to set classic cross-country / nordic ski tracks.

Recommended additional purchase – 4 to 6 (16″ x 16″ x 1″) concrete pavers or add 30-40 lbs of weight to the chassis for proper compaction and track setting.

Note: Not recommended for

– professional or extensive snow trail grooming

– snow trail grooming over rough terrain with hidden hazards, such as large rocks, tree roots, or tree stumps.

SNO-BLASTER®

SNO-BLASTER®

Category: Narrow Trail (20″ – 44″ Trail Width)

Application: Great to tackle fresh powder or deep snow and create compacted corduroy trail great for dog sledding, fat bike trails, tubing runs, snow shoeing / hiking trails, and so much more.

Recommended Towing Machine:

  • UTV (with Snow Tracks)
  • Snowmobile

Available Accessories:

  6in STD PIN Coupler (3″ & 5″ Offsets available)

6in RING Coupler (3″ & 5″ Offsets available)

12″ Standard Wing Set

SNO-BLASTER V-PLOW

TRAKOR®

TRAKOR®

Category: Nordic / Cross-Country

Application:

Recommended Towing Machine:

  • UTV (with Snow Tracks)
  • Snowmobile

Available Accessories:

  6in STD PIN Coupler (3″ & 5″ Offsets available)

6in RING Coupler (3″ & 5″ Offsets available)

12″ Standard Wing Set

36″ SNO-RAZOR & Deflector

DeTRAKOR

LOPPET 60 Drawbar

Standard 44 Drawbar

DeTRAKOR

$600.00

Wide Trail (48-96 in)

SNO-MASTER®

SNO-MASTER® 48

Category: Wide Trail

Application:

Recommended Towing Machine:

  • UTV (with Snow Tracks)
  • Snowmobile (with 15″ wide, 136″+ Long Track)

Available Accessories:

  6in STD PIN Coupler (3″ & 5″ Offsets available)

6in RING Coupler (3″ & 5″ Offsets available)

12″ Standard Wing Set

48″ SNO-RAZOR & Deflector

48″ Wheel Kit

SNO-MASTER® 72

Category: Wide Trail

Application:

Recommended Towing Machine:

  • UTV (with Snow Tracks)
  • Snowmobile (with 20″ Wide, 154″+ Long Track)

Available Accessories:

  6in STD PIN Coupler (3″ & 5″ Offsets available)

6in RING Coupler (3″ & 5″ Offsets available)

12″ Standard Wing Set

72″ SNO-RAZOR & Deflector

72″ Wheel Kit

Sale!

ALL NEW SNO-MASTER® 48 FLOAT RAZOR

$5,050.00
Sale!

ALL NEW SNO-MASTER® 72 FLOAT RAZOR

$6,200.00

CUSTOM SNO-MASTER® V2.0 – STEEL SNOW GROOMER

$3,150.00$11,100.00

SNO-MASTER® – STEEL SNOW GROOMER

Build YOUR perfect SNO-MASTER® groomer with the options below!

*You can only pull (2) Trakors with the SNO-MASTER 72.

**ALL SNO-MASTERS ARE 2-3 WEEKS OUT AND WILL SHIP V2.0.

Sale!

NEW SNO-MASTER® 48 RAZOR FLOAT WHEEL KIT

$5,800.00
Sale!

SNO-MASTER® 48 RAZOR WHEEL

$5,400.00
Sale!

SNO-MASTER® 48 WING

$3,100.00
Sale!

SNO-MASTER® 72

$4,200.00
Sale!

SNO-MASTER® 72 FLOAT RAZOR WHEEL KIT

$7,100.00
Sale!

SNO-MASTER® 72 WHEEL

$5,100.00

SNO-MASTER® 72 WING

$4,450.00
Sale!

SNO-MASTER® 72 WING WHEEL

$5,250.00

Nordic Trail (48-96 in)

NORDIC Packages

Park Ranger Special

Category: Nordic / Cross-Country

Application: Parks & Recreation 72″-96″ wide corduroy groomed trail with a single classic track setter (TRAKOR) that can be attached on the left, center, or right side of the groomed path.

Recommended Towing Machine:

  • UTV (with Snow Tracks)
  • Snowmobile (with 15″ wide, 136″+ Long Track)

Included Accessories:

  6in STD PIN Coupler  – or –  6in RING Coupler

SNO-MASTER Chassis

SNO-MASTER Drawbar & Sub-Frame

SM Rear Hitch

20″ TRAKOR Chassis

44 Standard Drawbar w/ Pin Coupler

(2) 12″ Standard Wing Set

SNO-RAZOR & Deflector

NORDIC Pro Package

Category: Nordic / Cross-Country

Application: Parks & Recreation 72″-96″ wide corduroy groomed trail with a single classic track setter (TRAKOR) that can be attached on the left, center, or right side of the groomed path or removed for 72″-96″ wide Skate Trails. Includes wheel kit and towbar assembly to easily maneuver the grooming chassis over non-snow covered surfaces.

Recommended Towing Machine:

  • UTV (with Snow Tracks)
  • Snowmobile (with 15″ wide, 136″+ Long Track)

Included Accessories:

  6in STD PIN Coupler  – or –  6in RING Coupler

SNO-MASTER Chassis

SNO-MASTER Drawbar & Sub-Frame

20″ TRAKOR Chassis

44 Standard Drawbar w/ Pin Coupler

(2) 12″ Standard Wing Set

SNO-RAZOR & Deflector

Wheel Kit

Tow Bar Assembly

Sale!

NORDIC Pro 48 RAZOR FULL TOWBAR

$8,150.00
Sale!

NORDIC Pro 72- DOUBLE – RAZOR

$11,500.00

Showing 1–16 of 129 results

.093 Hitch Pin (Set of 2)

$5.00

.093 Hitch Pins enable a secured Drawbar connection when using the Loppet 60 Drawbars, Best-Line 76 Drawbars, Path-Master Drawbars, Sno-Blaster Drawbars, or the Standard 44 Drawbar.  Hitch Pin clip diameter (.093) is measured on the outside of the wire and is manufactured of Stainless Steel 18-8 with a total length of 1-5/8″. A total of (2) Hitch Pins are required when securing the Drawbars, one for each side, to a 20″ Snow Trail Grooming Chassis

.125 Hitch Pin (Set of 2) for Drawbars

$5.00

.125 Stainless Steel Hitch Pin Set

(2) Stainless Steel .125 x 1-15/16 Hitch Pins

Used to secure drawbars to chassis or to secure SNO-BLASTER Clevis Pins on assembly.

10″ Flat Free Wheel (Qty 2)

$80.00

10″ Run Flat Wheel (Qty 2)

Measurement: Approximately 10″ x 3-1/2″ (Tire), 5/8″ (Axle Bore)

Material: Steel Wheel, Knobby All-Terrain Rubber Tire

Finish: Silver Enamel Powder Coat paint

Maximum Work Load: 300 lbs.

12″ Wing Set

$200.00

12″ Wing Set

(1) Left Wing & Bracket

(1) Right Wing & Bracket

(4) 1/4-20 x 7/8″ Stainless Steel Hex Bolts

(4) 1/4-20 Stainless Steel Nylock Nuts

Used on SNO-MASTER 48, SNO-MASTER 72, SNO-BLASTER, TRAKOR, and PATH-MASTER

15″ Straps (Pkg of 2)

$9.99

18″ Lifting Handle w/ Rubber Grip

$50.00

18″ Lifting Handle w/ Rubber Grip

  • Measurement: (18″ Handle + 6″ Mounting section) 24″ x 1″ round steel tubing
  • Finish: Bengal Black powder coated paint
  • Includes: (1) 5″ Vinyl Grip, (1) Lifting Handle, (1) 1/4-20 x 1-1/4″ Stainless Steel Hex Bolt, (1) 1/4-20 Stainless Steel Nylock Nut
Sale!

18″ Pin Coupler w/ Detent Pin

$50.00

2″ Ball Adapter

$20.00

2″ Ball Adapter

3/8″ zinc coated 2″ Ball Adapter is designed to work with a Snow Groomers Pin Coupler to quickly attach to a 2″ ball hitch. Simply lower the Adapter over the 2″ ball, slide the pin coupler over the adapter so that the 3/8″ holes align, and insert the 3/8″ detent pin to secure.  The overlap of the pin coupler tabs takes up the space of the 1/8″ and does not allow the Adapter to bounce off. Can also be used as a ring on a pintle hook.

20″ Chassis Lower Weight Cushion

$25.00

20 inch Chassis Lower Weight Cushion

0.125 ABS plastic Lower Weight Cushion allows for easy replacement of damaged cushion on the 20″ SNO-BLASTER or PATH-MASTER chassis’.

Material: 0.125″ ABS Plastic, Hair cell finish on outward side, smooth finish on inward side.

Measurement: Approximately 15-1/4″ x 15-3/4″

Includes: (2) Pre-installed strips of industrial double-sided adhesive tape.

20″ Chassis Weight Cover (w/ 2-15″ Rubber Straps)

$50.00

20 inch Chassis Weight Cover

Pre-bent ABS plastic bow cover allows for easy replacement of damaged weight covers on the 20″ SNO-BLASTER, PATH-MASTER, and TRAKOR chassis’.

Material: .125 ABS Plastic, Hair cell finish on outward side, smooth finish on inward side.

Measurement: Approximately 15-3/4″ x 15-3/4″

Includes: (2) 15″ Rubber Straps

Sale!

20″ Drawbar Spreader

$50.00

Add strength and durability to your Loppet 60, Best-Line 76, or Path-Master Drawbars.  The 20″ Drawbar Spreader has been designed to easily add the control and reduce twisting when grooming snow in rough terrain. Made from carbon steel and sealed with a matching black power coat paint to last the life of your grooming chassis.

Measurement: Overall – 3/4″ x 3/4″ x 23″

Material: 3/4″ Square Carbon Steel Tubing

Finish: Bengal Black Powder Coat

Hardware Kit:

(2) 3/8-16 x 2″ Stainless Steel Hex Bolt

(2) 3/8-16 Stainless Steel Nylock Nuts

20″ Hitch Plate Assembly

$80.00

20″ Hitch Plate Assembly

Measurement: 6-1/2″ x 7-1/4″

Material: 12 GA Carbon Steel Plate

Finish: Bengal Black Powder Coat Paint

Hardware Kit:

  • 4 – 5/16-18 x 3″ Stainless Steel Carriage Bolts
  • 4 – 5/16-18 Stainless Steel Nylock Nuts
  • 1 – Anti-Seize Packet

20″ Urethane Snow Groomer Comb

$100.00

PATH MASTER / SNO BLASTER Comb

20″ Snow Groomer Comb

One flexible 20″ Chassis Urethane Comb.

Material: Heat Cured Pour Mold Urethane

Measurement: 19-3/4″ x 8-1/2″ (Overall) 19-3/4″ x 6-1/2″ (Comb)

Combs: 25 comb slots

Thickness: 5/8″ (Combs) 1/8″ (Mounting Tab)

 

24″ Lifting Handle w/ Rubber Grip

$90.00

24″ Lifting Handle w/ Rubber Grip

  • Measurement: (24″ Handle + 6″ Mounting section) 30″ x 1″ round steel tubing
  • Finish: Bengal Black powder coated paint
  • Includes: 5″ Rubber Grip

24″ Snow Groomer Urethane Comb (SM48 Set of 2)

$400.00

(2) 24 inch Urethane Snow Groomer Comb Set

Measurement: Approximately 14-1/2″ x 24″ (Overall), 6″ x 5/8″ (per Comb)

Material: Black Urethane

Combs: 30 corduroy combs per

Includes: (2) 24 inch combs, (14) #66 Pop Rivets, (6) #68 Pop Rivets

24″ Urethane Comb (SM72 Set of 3)

$600.00

(3) 24 inch Urethane Comb Set

Measurement: Approximately 14-1/2″ x 24″ (Overall), 6″ x 5/8″ (per Comb)

Material: Black Urethane

Combs: 30 corduroy combs per

Includes: (3) 24 inch combs, (21) #66 Pop Rivets, (9) #68 Pop Rivets