Showing 81–96 of 168 results

Plow Shovel (LH) w/ Shear

$149.99

Plow Shovel (LH) w/ Shear

Measurement: Approximately 10″ H x 32″ L

Material: 12 GA Stainless Steel (Shear), 10 GA Standard Steel Plate

Finish: Stainless Steel (Plow Shear), Safety Yellow Powder Coat Paint

Includes: (1) Plow Blade, (1) Plow Shear, (10) 1/4-20 x 3/4″ Star Drive Pan Head Screws, (5) 1/4-20 x 2-1/4″ Stainless Steel Carriage Bolts, (7) 1/4-20 Stainless Steel Nylock Nuts, (2) 1/4″ Stainless Steel Washers

Plow Shovel (RH) w/ Shear

$149.99

Plow Shovel (RH) w/ Shear

Measurement: Approximately 10″ H x 32″ L

Material: 12 GA Stainless Steel (Shear), 10 GA Standard Steel Plate

Finish: Stainless Steel (Plow Shear), Safety Yellow Powder Coat Paint

Includes: (1) Plow Blade, (1) Plow Shear, (10) 1/4-20 x 3/4″ Star Drive Pan Head Screws, (5) 1/4-20 x 2-1/4″ Stainless Steel Carriage Bolts, (7) 1/4-20 Stainless Steel Nylock Nuts, (2) 1/4″ Stainless Steel Washers

Plow Shovels w/ Stainless Steel Shears (Set of 2) and Nose Guard

$349.99

Plow Shovel Set w/ Shears and Nose Guard

Measurement: Approximately 10″ H x 32″ L each shovel

Material: 12 GA Stainless Steel (Shear), 10 GA Standard Steel Plate

Finish: Stainless Steel (Plow Shear and Nose Guard), Safety Yellow Powder Coat Paint

Includes: (2) Plow Blade, (2) Plow Shear, (18) 1/4-20 x 3/4″ Star Drive Pan Head Screws, (10) 1/4-20 x 2-1/4″ Stainless Steel Carriage Bolts, (12) 1/4-20 Stainless Steel Nylock Nuts, (2) 1/4″ Stainless Steel Washers

Plow Stainless Steel Shears (Set of 2)

$69.99

SNO BLASTER Plow Stainless Steel Shears

As part of the SNO BLASTER plow shovels, the plow shears are the wearable part that after significant use will commonly need replacement.

Replacement on SNO BLASTER plow shovels only.

Measurement: Approximately 23-1/2″ x 1-1/2″

Material: 12 GA Stainless Steel

Finish: #4 Stainless Surface on leading side

Includes Hardware: (14) 1/4-20 x 3/4″ Star Drive Pan Head Screws

Polaris Snowmobile Tongue-Type Tow Hitch

$42.00

Reese 80305 Tow Ready Receiver Extension – 14″

$56.40

Shear Nose Guard

$19.99

Shear Nose Guard

Measurement: Approximately 6-1/2″ x 2″

Material: 12 GA Stainless Steel

Finish: #4 Stainless Surface on leading side

SM REAR HITCH

$99.99

SNO MASTER Rear Hitch

SNO-MASTER Rear Hitch attaches quickly to the rear of the SNO-MASTER 48 and 72 Chassis using the included 4 – 1/4-20 x 7/8″ Stainless Steel Hex Bolts and 4 – 1/4-20 Stainless Steel Nylock Nuts. Each SNO-MASTER chassis includes the pre-drilled holes (some located behind the sticker) to attach the Rear Hitch on the left, right, or center of the groomed trail. The Stainless Steel Pin enables the 180 degree vertical movement needed to attach the Pin Coupler of the TRAKOR.

  • Material: Pin-Stainless Steel, Hitch-Carbon Steel
  • Finish: Bengal Black Powder Coated Paint

SM48 Drawbars (LH and RH)

$579.99

SNO MASTER 48 Drawbars

Measurement: Approximately 1″ x 2″ x 82″

Material: 11 GA Standard Steel Rectangle Tube

Finish: Bengal Black Powder Coat paint

Includes: (1) Left Hand SM48 Drawbar, (1) Right Hand SM48 Drawbar, (2) .125″ x 1-15/16″ Stainless Steel Hitch Pins, (2) 1/2″ Zinc plated Washer

SM48 Hitch Plate Assembly

$89.99

SNO MASTER 48 Hitch Plate Assembly

Measurement: 6-1/2″ x 8-1/4″

Material: 12 GA Carbon Steel Plate

Finish: Bengal Black Powder Coat Paint

Includes: (1) Upper Hitch Plate w/ Receiver, (1) Lower Hitch Plate, (4) 5/16-18 x 3″ Stainless Steel Carriage Bolts, (4) 5/16-18 Stainless Steel Nylock Nuts, (1) Anti-Seize Packet

SM48 Sub-Frame

$399.99

SNO MASTER 48 Sub Frame

Measurement: Approximately 1-1/2″ x 14-1/2″ x 49″

Material: 1″ x 1-1/2″ 11 GA Rectangle Tubing, 7 GA Standard Steel plate

Finish: Bengal Black Powder Coat paint

Includes: (1) SM48 Sub-Frame, (4) 3/8-16 x 1-3/4″ Stainless Steel Hex Bolt, (4) 3/8-16 Stainless Steel Nylock Nuts

SM48 Weight/Bow Cover Set (1 Left, 1 Right)

$49.99

SM48 Weight and Bow Cover Set

Measurement: Approximately 24″ x 13-1/2″

Material: .125 ABS

Finish: Black ABS, Haircell outward side, smooth inward side

Includes: (2) 24″ Weight and Bow Covers, (14) #68 Pop Rivets

SM72 Drawbars (LH and RH)

$589.99

SNO MASTER 72 Drawbars

Measurement: Approximately 1″ x 2″ x 82″

Material: 11 GA Standard Steel Rectangle Tube

Finish: Bengal Black Powder Coat paint

Includes: (1) Left Hand SM72 Drawbar, (1) Right Hand SM72 Drawbar, (2) .125″ x 1-15/16″ Stainless Steel Hitch Pins, (2) 1/2″ Zinc plated Washer

SM72 Hitch Plate Assembly

$119.99

SNO MASTER 72 Hitch Plate Assembly

Measurement: Approximately 7-1/4″ x 11″

Material: 12 GA Carbon Steel Plate

Finish: Bengal Black Powder Coat Paint

Includes: (4) 5/16-18 x 3″ Stainless Steel Carriage Bolts, (4) 5/16-18 Stainless Steel Nylock Nuts, (1) Anti-Seize Packet

SM72 Sub-Frame

$599.99

SNO MASTER 72 Sub Frame

Measurement: Approximately 2″ x 14″ x 73″

Material: 1″ x 2″ 11 GA Rectangle Tubing, 7 GA Standard Steel plate

Finish: Bengal Black Powder Coat paint

Includes: (1) SM72 Sub-Frame, (4) 3/8-16 x 1-3/4″ Stainless Steel Hex Bolt, (4) 3/8-16 Stainless Steel Nylock Nuts

SM72 Weight/Bow Cover Set (1 Left, 1 Right, 1 Center)

$69.99

SM72 Weight and Bow Cover Set

Measurement: Approximately 24″ x 13-1/2″

Material: .125 ABS

Finish: Black ABS, Haircell outward side, smooth inward side

Includes: (3) 24″ Weight and Bow Covers, (21) #68 Pop Rivets