Snow Groomers & Snow Grooming Equipment for winter sports.
Narrow Trail (20-44 in)
PATH-MASTER®
PATH-MASTER®
Category: Narrow Trail (20″ – 44″ Trail Width)
Application: Create compacted corduroy trail great for dog sledding, fat bike trails, tubing runs, snow shoeing / hiking trails, and so much more.
Recommended Towing Machine:
- UTV (with Snow Tracks)
- Snowmobile
Available Accessories:
6in STD PIN Coupler (3″ & 5″ Offsets available)
6in RING Coupler (3″ & 5″ Offsets available)
12″ Standard Wing Set
36″ SNO-RAZOR & Deflector
LOPPET 60 Drawbar
Standard 44 Drawbar
PATH-MASTER® LOPPET
$1,750.00PATH-MASTER® LOPPET WING
$1,900.00PATH-MASTER® RAZOR
$3,050.00PATH-MASTER® RAZOR WING
$3,200.00PATH-MASTER® STANDARD
$1,300.00PATH-MASTER® STANDARD WING
$1,400.00SNO-BLASTER®
SNO-BLASTER®
Category: Narrow Trail (20″ – 44″ Trail Width)
Application: Great to tackle fresh powder or deep snow and create compacted corduroy trail great for dog sledding, fat bike trails, tubing runs, snow shoeing / hiking trails, and so much more.
Recommended Towing Machine:
- UTV (with Snow Tracks)
- Snowmobile
Available Accessories:
6in STD PIN Coupler (3″ & 5″ Offsets available)
6in RING Coupler (3″ & 5″ Offsets available)
12″ Standard Wing Set
SNO-BLASTER V-PLOW
PATH-MASTER – SNO-BLASTER® 33
$4,200.00TRAKOR – SNO-BLASTER® 33
$4,300.00TRAKOR®
TRAKOR®
Category: Nordic / Cross-Country
Application:
Recommended Towing Machine:
- UTV (with Snow Tracks)
- Snowmobile
Available Accessories:
6in STD PIN Coupler (3″ & 5″ Offsets available)
6in RING Coupler (3″ & 5″ Offsets available)
12″ Standard Wing Set
36″ SNO-RAZOR & Deflector
DeTRAKOR
LOPPET 60 Drawbar
Standard 44 Drawbar
DeTRAKOR
$600.00TRAKOR Standard
$1,400.00TRAKOR® LOPPET
$1,900.00TRAKOR® LOPPET – RAZOR-DeTRAKOR
$3,800.00TRAKOR® LOPPET – RAZOR-DeTRAKOR-WING
$3,950.00TRAKOR® LOPPET WING
$2,050.00TRAKOR® LOPPET-RAZOR
$3,200.00TRAKOR® LOPPET-RAZOR-WING
$3,400.00TRAKOR® STANDARD WING
$1,600.00TRAKOR® STANDARD WING – DeTRAKOR
$2,150.00TRAKOR® STANDARD WING – SM REAR HITCH
$1,650.00TRAKOR® STANDARD WING – SM REAR HITCH-DeTRAKOR
$2,250.00Wide Trail (48-96 in)
SNO-MASTER®
SNO-MASTER® 48
Category: Wide Trail
Application:
Recommended Towing Machine:
- UTV (with Snow Tracks)
- Snowmobile (with 15″ wide, 136″+ Long Track)
Available Accessories:
6in STD PIN Coupler (3″ & 5″ Offsets available)
6in RING Coupler (3″ & 5″ Offsets available)
12″ Standard Wing Set
48″ SNO-RAZOR & Deflector
48″ Wheel Kit
SNO-MASTER® 72
Category: Wide Trail
Application:
Recommended Towing Machine:
- UTV (with Snow Tracks)
- Snowmobile (with 20″ Wide, 154″+ Long Track)
Available Accessories:
6in STD PIN Coupler (3″ & 5″ Offsets available)
6in RING Coupler (3″ & 5″ Offsets available)
12″ Standard Wing Set
72″ SNO-RAZOR & Deflector
72″ Wheel Kit
SNO-MASTER® 48
$2,900.00SNO-MASTER® 48 RAZOR
$4,600.00SNO-MASTER® 48 RAZOR WHEEL
$5,400.00SNO-MASTER® 48 WHEEL
$3,700.00SNO-MASTER® 48 WING
$3,100.00SNO-MASTER® 48 WING RAZOR
$4,750.00SNO-MASTER® 48 WING RAZOR WHEEL
$5,600.00SNO-MASTER® 48 WING WHEEL
$3,900.00SNO-MASTER® 72
$4,200.00SNO-MASTER® 72 RAZOR
$5,750.00SNO-MASTER® 72 RAZOR WHEEL
$6,600.00SNO-MASTER® 72 WHEEL
$5,100.00Nordic Trail (48-96 in)
NORDIC Packages
Park Ranger Special
Category: Nordic / Cross-Country
Application: Parks & Recreation 72″-96″ wide corduroy groomed trail with a single classic track setter (TRAKOR) that can be attached on the left, center, or right side of the groomed path.
Recommended Towing Machine:
- UTV (with Snow Tracks)
- Snowmobile (with 15″ wide, 136″+ Long Track)
Included Accessories:
6in STD PIN Coupler – or –
6in RING Coupler
SNO-MASTER Chassis
SNO-MASTER Drawbar & Sub-Frame
SM Rear Hitch
20″ TRAKOR Chassis
44 Standard Drawbar w/ Pin Coupler
(2) 12″ Standard Wing Set
SNO-RAZOR & Deflector
Park Ranger Special 48 RAZOR
$6,350.00Park Ranger Special 72 RAZOR
$7,500.00NORDIC Pro Package
Category: Nordic / Cross-Country
Application: Parks & Recreation 72″-96″ wide corduroy groomed trail with a single classic track setter (TRAKOR) that can be attached on the left, center, or right side of the groomed path or removed for 72″-96″ wide Skate Trails. Includes wheel kit and towbar assembly to easily maneuver the grooming chassis over non-snow covered surfaces.
Recommended Towing Machine:
- UTV (with Snow Tracks)
- Snowmobile (with 15″ wide, 136″+ Long Track)
Included Accessories:
6in STD PIN Coupler – or –
6in RING Coupler
SNO-MASTER Chassis
SNO-MASTER Drawbar & Sub-Frame
20″ TRAKOR Chassis
44 Standard Drawbar w/ Pin Coupler
(2) 12″ Standard Wing Set
SNO-RAZOR & Deflector
Wheel Kit
Tow Bar Assembly
NORDIC Pro 48 RAZOR FULL TOWBAR
$8,150.00NORDIC Pro 48 RAZOR SINGLE SIDE TOWBAR
$7,900.00NORDIC Pro 72 RAZOR FULL TOWBAR
$9,400.00NORDIC Pro 72 RAZOR SINGLE SIDE TOWBAR
$9,100.00NORDIC Pro 72- DOUBLE – RAZOR
$11,500.00Showing 1–16 of 174 results
.093 Hitch Pin (Set of 2)
$5.00.093 Hitch Pins enable a secured Drawbar connection when using the Loppet 60 Drawbars, Best-Line 76 Drawbars, Path-Master Drawbars, Sno-Blaster Drawbars, or the Standard 44 Drawbar. Hitch Pin clip diameter (.093) is measured on the outside of the wire and is manufactured of Stainless Steel 18-8 with a total length of 1-5/8″. A total of (2) Hitch Pins are required when securing the Drawbars, one for each side, to a 20″ Snow Trail Grooming Chassis
.125 Hitch Pin (Set of 2) for Drawbars
$5.00.125 Stainless Steel Hitch Pin Set
(2) Stainless Steel .125 x 1-15/16 Hitch Pins
Used to secure drawbars to chassis or to secure SNO-BLASTER Clevis Pins on assembly.
10″ Flat Free Wheel
$40.0010″ Run Flat Wheel
Measurement: Approximately 10″ x 3-1/2″ (Tire), 5/8″ (Axle Bore)
Material: Steel Wheel, Knobby All-Terrain Rubber Tire
Finish: Silver Enamel Powder Coat paint
Maximum Work Load: 300 lbs.
12″ Wing Set
$200.0012″ Wing Set
(1) Left Wing & Bracket
(1) Right Wing & Bracket
(4) 1/4-20 x 7/8″ Stainless Steel Hex Bolts
(4) 1/4-20 Stainless Steel Nylock Nuts
Used on SNO-MASTER 48, SNO-MASTER 72, SNO-BLASTER, TRAKOR, and PATH-MASTER
15″ Straps (Pkg of 2)
$9.9918″ Lifting Handle w/ Rubber Grip
$50.0018″ Lifting Handle w/ Rubber Grip
- Measurement: (18″ Handle + 6″ Mounting section) 24″ x 1″ round steel tubing
- Finish: Bengal Black powder coated paint
- Includes: (1) 5″ Vinyl Grip, (1) Lifting Handle, (1) 1/4-20 x 1-1/4″ Stainless Steel Hex Bolt, (1) 1/4-20 Stainless Steel Nylock Nut
18″ Pin Coupler w/ Detent Pin
$50.002″ Ball Adapter
$20.002″ Ball Adapter
3/8″ zinc coated 2″ Ball Adapter is designed to work with a Snow Groomers Pin Coupler to quickly attach to a 2″ ball hitch. Simply lower the Adapter over the 2″ ball, slide the pin coupler over the adapter so that the 3/8″ holes align, and insert the 3/8″ detent pin to secure. The overlap of the pin coupler tabs takes up the space of the 1/8″ and does not allow the Adapter to bounce off. Can also be used as a ring on a pintle hook.
20″ Chassis Bow Cover
$40.0020 inch Chassis Bow Cover
Pre-bent ABS plastic bow cover allows for easy replacement of damaged bow covers on the 20″ SNO-BLASTER, PATH-MASTER, and TRAKOR chassis’.
Material: ABS Plastic, Hair cell finish on outward side, smooth finish on inward side.
Measurement: Approximately 19-3/4″ x 10″
Includes: (3) 10-32 x 3/8″ Phillips Screw (6) #66 Pop Rivets
20″ Chassis End Weight Cushion
$5.0020 inch Chassis End Weight Cushion
0.125 ABS plastic Lower Weight Cushion allows for easy replacement of damaged cushion on the 20″ SNO-BLASTER, PATH-MASTER, or TRAKOR chassis’.
Material: 0.125″ ABS Plastic, Hair cell finish on outward side, smooth finish on inward side.
Measurement: Approximately 1-5/8″ x 15-3/8″
Includes: (1) Pre-installed strips of industrial double-sided adhesive tape.
20″ Chassis Lower Weight Cushion
$25.0020 inch Chassis Lower Weight Cushion
0.125 ABS plastic Lower Weight Cushion allows for easy replacement of damaged cushion on the 20″ SNO-BLASTER or PATH-MASTER chassis’.
Material: 0.125″ ABS Plastic, Hair cell finish on outward side, smooth finish on inward side.
Measurement: Approximately 15-1/4″ x 15-3/4″
Includes: (2) Pre-installed strips of industrial double-sided adhesive tape.
20″ Chassis Side Weight Cushion (Set of 2)
$5.0020 inch Chassis Side Weight Cushion
0.125 ABS plastic Side Weight Cushion allows for easy replacement of damaged side cushions on the 20″ SNO-BLASTER, PATH-MASTER, or TRAKOR chassis’.
Material: 0.125″ ABS Plastic, Hair cell finish on outward side, smooth finish on inward side.
Measurement: Approximately 1″ x 10″
Includes: (2) Pre-installed strips of industrial double-sided adhesive tape, one on each Side Cushion
20″ Chassis Weight Cover (w/ 2-15″ Rubber Straps)
$40.0020 inch Chassis Weight Cover
Pre-bent ABS plastic bow cover allows for easy replacement of damaged weight covers on the 20″ SNO-BLASTER, PATH-MASTER, and TRAKOR chassis’.
Material: .125 ABS Plastic, Hair cell finish on outward side, smooth finish on inward side.
Measurement: Approximately 15-3/4″ x 15-3/4″
Includes: (2) 15″ Rubber Straps
20″ Drawbar Spreader
$50.00Add strength and durability to your Loppet 60, Best-Line 76, or Path-Master Drawbars. The 20″ Drawbar Spreader has been designed to easily add the control and reduce twisting when grooming snow in rough terrain. Made from carbon steel and sealed with a matching black power coat paint to last the life of your grooming chassis.
Measurement: Overall – 3/4″ x 3/4″ x 23″
Material: 3/4″ Square Carbon Steel Tubing
Finish: Bengal Black Powder Coat
Hardware Kit:
(2) 3/8-16 x 2″ Stainless Steel Hex Bolt
(2) 3/8-16 Stainless Steel Nylock Nuts
20″ Hitch Plate Assembly
$80.0020″ Hitch Plate Assembly
Measurement: 6-1/2″ x 7-1/4″
Material: 12 GA Carbon Steel Plate
Finish: Bengal Black Powder Coat Paint
Hardware Kit:
- 4 – 5/16-18 x 3″ Stainless Steel Carriage Bolts
- 4 – 5/16-18 Stainless Steel Nylock Nuts
- 1 – Anti-Seize Packet
20″ Urethane Comb
$100.00PATH MASTER / SNO BLASTER Comb
One flexible 20″ Chassis Urethane Comb.
Material: Heat Cured Pour Mold Urethane
Measurement: 19-3/4″ x 8-1/2″ (Overall) 19-3/4″ x 6-1/2″ (Comb)
Combs: 25 comb slots
Thickness: 5/8″ (Combs) 1/8″ (Mounting Tab)