Showing 97–112 of 177 results
$ 100.00
SNO MASTER Rear Hitch
SNO-MASTER Rear Hitch attaches quickly to the rear of the SNO-MASTER 48 and 72 Chassis using the included 4 – 1/4-20 x 7/8″ Stainless Steel Hex Bolts and 4 – 1/4-20 Stainless Steel Nylock Nuts. Each SNO-MASTER chassis includes the pre-drilled holes (some located behind the sticker) to attach the Rear Hitch on the left, right, or center of the groomed trail. The Stainless Steel Pin enables the 180 degree vertical movement needed to attach the Pin Coupler of the TRAKOR.
Material: Pin-Stainless Steel, Hitch-Carbon Steel
Finish: Bengal Black Powder Coated Paint
$ 750.00
SNO MASTER 48 Drawbars
Measurement: Approximately 1″ x 2″ x 82″
Material: 11 GA Standard Steel Rectangle Tube
Finish: Bengal Black Powder Coat paint
Includes: (1) Left Hand SM48 Drawbar, (1) Right Hand SM48 Drawbar, (2) .125″ x 1-15/16″ Stainless Steel Hitch Pins, (2) 1/2″ Zinc plated Washer
$ 90.00
SNO MASTER 48 Hitch Plate Assembly
Measurement: 6-1/2″ x 8-1/4″
Material: 12 GA Carbon Steel Plate
Finish: Bengal Black Powder Coat Paint
Includes: (1) Upper Hitch Plate w/ Receiver, (1) Lower Hitch Plate, (4) 5/16-18 x 3″ Stainless Steel Carriage Bolts, (4) 5/16-18 Stainless Steel Nylock Nuts, (1) Anti-Seize Packet
$ 400.00
SNO MASTER 48 Sub Frame
Measurement: Approximately 1-1/2″ x 14-1/2″ x 49″
Material: 1″ x 1-1/2″ 11 GA Rectangle Tubing, 7 GA Standard Steel plate
Finish: Bengal Black Powder Coat paint
Includes: (1) SM48 Sub-Frame, (4) 3/8-16 x 1-3/4″ Stainless Steel Hex Bolt, (4) 3/8-16 Stainless Steel Nylock Nuts
$ 50.00
SM48 Weight and Bow Cover Set
Measurement: Approximately 24″ x 13-1/2″
Material: .125 ABS
Finish: Black ABS, Haircell outward side, smooth inward side
Includes: (2) 24″ Weight and Bow Covers, (14) #68 Pop Rivets
$ 1,400.00
SM72 Drawbars (LH and RH) w/Sub-Frame & Hitch Plate Assembly
Measurement: Approximately 1″ x 2″ x 82″
Material: 11 GA Standard Steel Rectangle Tube
Finish: Bengal Black Powder Coat paint
Includes: (1) Left Hand SM72 Drawbar, (1) Right Hand SM72 Drawbar, (2) .125″ x 1-15/16″ Stainless Steel Hitch Pins, (2) 1/2″ Zinc plated Washer
$ 120.00
SNO MASTER 72 Hitch Plate Assembly
Measurement: Approximately 7-1/4″ x 11″
Material: 12 GA Carbon Steel Plate
Finish: Bengal Black Powder Coat Paint
Includes: (4) 5/16-18 x 3″ Stainless Steel Carriage Bolts, (4) 5/16-18 Stainless Steel Nylock Nuts, (1) Anti-Seize Packet
$ 500.00
SNO MASTER 72 Sub Frame
Measurement: Approximately 2″ x 14″ x 73″
Material: 1″ x 2″ 11 GA Rectangle Tubing, 7 GA Standard Steel plate
Finish: Bengal Black Powder Coat paint
Includes: (1) SM72 Sub-Frame, (4) 3/8-16 x 1-3/4″ Stainless Steel Hex Bolt, (4) 3/8-16 Stainless Steel Nylock Nuts
$ 75.00
SM72 Weight and Bow Cover Set
Measurement: Approximately 24″ x 13-1/2″
Material: .125 ABS
Finish: Black ABS, Haircell outward side, smooth inward side
Includes: (3) 24″ Weight and Bow Covers, (21) #68 Pop Rivets
$ 140.00
SNO BLASTER Cross Tube
Measurement: Approximately 3″ x 26″ (Overall)
Material: 1-1/2″ x 3″ 11 GA Rectangle Tube, 7 GA Standard Steel Plate
Finish: Bengal Black Powder Coat Paint
Includes: (1) Cross tube, (4) 3/8-16 x 2-1/4″ Stainless Steel Hex Bolt, (4) 3/8-16 Stainless Steel Nylock Nuts
$ 70.00
SNO-BLASTER Front Link
Measurement: Approximately 1″ x 11″- 13″ (adjustable range)
Material: 1″ x 11 GA Standard Steel Tube, 7 GA Standard Steel (Tabs)
Finish: Stainless Steel Locking Nut, Bengal Black Powder Coat Paint
Includes: (1) Front Link, (2) Clevis Pins, (2) Hitch Pins
$ 250.00
SNO BLASTER Lift Tower Assembly
Measurement: Approximately 4-1/2″ x 5″ x 15″
Material: Stainless Steel Screw, 7 GA Standard Steel Plate, 16 GA Standard Steel Plate, 1/2″ Standard Steel Plate
Finish: Bengal Black Powder Coat Paint
Includes: (1) Lift Tower Assembly, (1) Clevis Pin, (1) Hitch Pin, (2) 3/8-16 x 2-1/2 Stainless Steel Tap Bolts, (2) 3/8-16 Stainless Steel Nylock Nuts
$ 40.00
SNO BLASTER Lifting Link
Measurement: Approximately 1-1/2″ x 9″
Material: 3/8″ Standard Steel, 7 GA Standard Steel (Tab)
Finish: Bengal Black Powder Coat Paint
Includes: (1) Lifting Link, (2) Clevis Pins, (2) Hitch Pins
$ 100.00
SNO-BLASTER Lower Hitch Plate
Measurement: Approximately 10″ x 7 ”
Material: 7 GA Standard Steel
Finish: Bengal Black Powder Coat Paint
$ 500.00
SNO-BLASTER Pan
Measurement: Approximately 33″ x 31″ (Overall Footprint)
Material: 1 x 1-1/2″ x 11 GA Rectangle Tube, 10 GA Standard Steel Plate, 3/8″ Standard Steel Plate
Finish: Bengal Black Powder Coat Paint
$ 50.00
SNO-BLASTER Rear Link
Measurement: Approximately 1″ x 1-1/2″ x 12″ (Overall)
Material: 11 GA 1″ x 1-1/2″ Standard Steel Rectangle Tube, 7 GA Standard Steel (Tabs)
Finish: Bengal Black Powder Coat paint
Includes: (2) Rear Links, (4) Clevis Pins, (4) Hitch Pins