Showing 1–16 of 105 results

.093 Hitch Pin (Set of 2)

$5.00

.093 Hitch Pins enable a secured Drawbar connection when using the Loppet 60 Drawbars, Best-Line 76 Drawbars, Path-Master Drawbars, Sno-Blaster Drawbars, or the Standard 44 Drawbar.  Hitch Pin clip diameter (.093) is measured on the outside of the wire and is manufactured of Stainless Steel 18-8 with a total length of 1-5/8″. A total of (2) Hitch Pins are required when securing the Drawbars, one for each side, to a 20″ Snow Trail Grooming Chassis

.125 Hitch Pin (Set of 2) for Drawbars

$5.00

.125 Stainless Steel Hitch Pin Set

(2) Stainless Steel .125 x 1-15/16 Hitch Pins

Used to secure drawbars to chassis or to secure SNO-BLASTER Clevis Pins on assembly.

10″ Flat Free Wheel (Qty 2)

$80.00

10″ Run Flat Wheel (Qty 2)

Measurement: Approximately 10″ x 3-1/2″ (Tire), 5/8″ (Axle Bore)

Material: Steel Wheel, Knobby All-Terrain Rubber Tire

Finish: Silver Enamel Powder Coat paint

Maximum Work Load: 300 lbs.

12″ Wing Set

$200.00

12″ Wing Set

(1) Left Wing & Bracket

(1) Right Wing & Bracket

(4) 1/4-20 x 7/8″ Stainless Steel Hex Bolts

(4) 1/4-20 Stainless Steel Nylock Nuts

Used on SNO-MASTER 48, SNO-MASTER 72, SNO-BLASTER, TRAKOR, and PATH-MASTER

15″ Straps (Pkg of 2)

$9.99

18″ Lifting Handle w/ Rubber Grip

$50.00

18″ Lifting Handle w/ Rubber Grip

  • Measurement: (18″ Handle + 6″ Mounting section) 24″ x 1″ round steel tubing
  • Finish: Bengal Black powder coated paint
  • Includes: (1) 5″ Vinyl Grip, (1) Lifting Handle, (1) 1/4-20 x 1-1/4″ Stainless Steel Hex Bolt, (1) 1/4-20 Stainless Steel Nylock Nut
Sale!

18″ Pin Coupler w/ Detent Pin

$50.00

2″ Ball Adapter

$20.00

2″ Ball Adapter

3/8″ zinc coated 2″ Ball Adapter is designed to work with a Snow Groomers Pin Coupler to quickly attach to a 2″ ball hitch. Simply lower the Adapter over the 2″ ball, slide the pin coupler over the adapter so that the 3/8″ holes align, and insert the 3/8″ detent pin to secure.  The overlap of the pin coupler tabs takes up the space of the 1/8″ and does not allow the Adapter to bounce off. Can also be used as a ring on a pintle hook.

20″ Chassis Lower Weight Cushion

$25.00

20 inch Chassis Lower Weight Cushion

0.125 ABS plastic Lower Weight Cushion allows for easy replacement of damaged cushion on the 20″ SNO-BLASTER or PATH-MASTER chassis’.

Material: 0.125″ ABS Plastic, Hair cell finish on outward side, smooth finish on inward side.

Measurement: Approximately 15-1/4″ x 15-3/4″

Includes: (2) Pre-installed strips of industrial double-sided adhesive tape.

20″ Chassis Weight Cover (w/ 2-15″ Rubber Straps)

$50.00

20 inch Chassis Weight Cover

Pre-bent ABS plastic bow cover allows for easy replacement of damaged weight covers on the 20″ SNO-BLASTER, PATH-MASTER, and TRAKOR chassis’.

Material: .125 ABS Plastic, Hair cell finish on outward side, smooth finish on inward side.

Measurement: Approximately 15-3/4″ x 15-3/4″

Includes: (2) 15″ Rubber Straps

Sale!

20″ Drawbar Spreader

$50.00

Add strength and durability to your Loppet 60, Best-Line 76, or Path-Master Drawbars.  The 20″ Drawbar Spreader has been designed to easily add the control and reduce twisting when grooming snow in rough terrain. Made from carbon steel and sealed with a matching black power coat paint to last the life of your grooming chassis.

Measurement: Overall – 3/4″ x 3/4″ x 23″

Material: 3/4″ Square Carbon Steel Tubing

Finish: Bengal Black Powder Coat

Hardware Kit:

(2) 3/8-16 x 2″ Stainless Steel Hex Bolt

(2) 3/8-16 Stainless Steel Nylock Nuts

20″ Hitch Plate Assembly

$80.00

20″ Hitch Plate Assembly

Measurement: 6-1/2″ x 7-1/4″

Material: 12 GA Carbon Steel Plate

Finish: Bengal Black Powder Coat Paint

Hardware Kit:

  • 4 – 5/16-18 x 3″ Stainless Steel Carriage Bolts
  • 4 – 5/16-18 Stainless Steel Nylock Nuts
  • 1 – Anti-Seize Packet

20″ Urethane Snow Groomer Comb

$100.00

PATH MASTER / SNO BLASTER Comb

20″ Snow Groomer Comb

One flexible 20″ Chassis Urethane Comb.

Material: Heat Cured Pour Mold Urethane

Measurement: 19-3/4″ x 8-1/2″ (Overall) 19-3/4″ x 6-1/2″ (Comb)

Combs: 25 comb slots

Thickness: 5/8″ (Combs) 1/8″ (Mounting Tab)

 

24″ Lifting Handle w/ Rubber Grip

$90.00

24″ Lifting Handle w/ Rubber Grip

  • Measurement: (24″ Handle + 6″ Mounting section) 30″ x 1″ round steel tubing
  • Finish: Bengal Black powder coated paint
  • Includes: 5″ Rubber Grip

24″ Snow Groomer Urethane Comb (SM48 Set of 2)

$400.00

(2) 24 inch Urethane Snow Groomer Comb Set

Measurement: Approximately 14-1/2″ x 24″ (Overall), 6″ x 5/8″ (per Comb)

Material: Black Urethane

Combs: 30 corduroy combs per

Includes: (2) 24 inch combs, (14) #66 Pop Rivets, (6) #68 Pop Rivets

24″ Urethane Comb (SM72 Set of 3)

$600.00

(3) 24 inch Urethane Comb Set

Measurement: Approximately 14-1/2″ x 24″ (Overall), 6″ x 5/8″ (per Comb)

Material: Black Urethane

Combs: 30 corduroy combs per

Includes: (3) 24 inch combs, (21) #66 Pop Rivets, (9) #68 Pop Rivets